Stepper Motors Linear Actuators [PDF file - 700k] Pico Droplet NEW Syringe Pumps Ready-To-Steptm Black Box Systems    - Single Axis    - Multiple Axis OEM Card sets    - Multiple Axis    - Motor Drivers CNC Retro Kits High Res  NEW Slide Systems Videos Software American Made

DIGITAL-CNC - retrofit packages come in two sizes. 2.0 Amp system    Speed:         .1 to 15 in./min. (Rapid)    Power:          230 in/oz    Ship Weight: 20 lbs.    Motor Type:   NEMA 34            (single stack wired in series) [ 2.0 Amp System W/ 230 in/oz Motors ]            Only $990.00 4.0 Amp system    Speed:          .1 to 25 in./min. (Rapid)    Power:           625 in/oz    Ship Weight:  37 lbs.    Motor Type:   NEMA 34            ( triple stack wired in Parallel) [ 4.0 Amp System W/ 625 in/oz Motors ]            Only $1945.00 *Stepper Motors sold seperately. Lowest Priced Stepper Motor CNC Controller Packages! 2.0 AMP 3 Axes System for 50 - 900 lb. Mill Drills. CNC 2.0x3 (3 Axes) 2.0Amp/phase, 40 VDC system Package Price $750.00 motors not-included CNC 2.0x3E QUAD-STEP 3 Axes Translator/Driver/ Pwr. supp. 1 ea. inc. TMG-CNC-PRO Machine controller software 1 ea. inc. Motor extension cable set 1 ea. inc. Mechanical limit & Home switches 9 ea. inc. CNC Retrofit instruction manual 1 ea. inc. Motor bracket Dwg. (general) 1 ea. inc. Optional accessories 80 in./oz Stepper Motor Size 23, 200 (1600) SPR (pricing for sale with CNC systems only) ( 3 ea. ) = 1 set ( 3 x $39.00 ) = $117.00 230 in./oz Stepper Motor Size 34, 200 (1600) SPR (pricing for sale with CNC systems only) ( 3 ea. ) = 1 set ( 3 x $80.00 ) = $240.00 Size 34 belt/pulley set 3/8" (32:16 tooth) 1 ea. $40.00 ea. Optical HOME 3 switch set (no lash) 1ea. $75.00 ea. 4 axis system upgrade 1 ea. $250.00 4.0 AMP 3 Axes System for 500 - 1200 lb. Mills. CNC 4.0x3 (3 Axes) 4.0Amp/phase, 40 VDC system Package Price $1495.00 motors not-included CNC 4.0x3 OCTAL-STEP 3 Axes Translator/Driver/ Pwr. supp. 1 ea. inc. TMG-CNC-PRO Machine controller software 1 ea. inc. Motor extension cable 1 ea. inc. Mechanical limit & Home switches 9 ea. inc. CNC Retrofit instruction manual 1 ea. inc. Mounting bracket set Dwg. (general) 1 ea. inc. Optional accessories 750 in./oz Stepper Motor Size 34, 200 (1600) SPR (pricing for sale with CNC systems only) (3 ea.) = 1 set (3 x $150.00) = $450.00 Size 34 belt/pulley set 1/2" (20:10 tooth) 1 ea. $60.00 ea. Optical HOME 3 switch set (no lash) 1 ea. $75.00 ea. 4 axis system upgrade 1 ea. $525.00

Important! Warranty Information

The Above Motion Group Stepper Motor Systems come fully tested with a 100% WARRANTY against any manufacturers defect. The stepper motors come terminated, and ready to plug into any TMG Product.

If you supply your own Stepper motors for these systems remember:

A miswired motor (shorted coil) or intermittent open/short in motor wiring can blow the drive circuitry.

* Most Field Sytems Damage and failures are due to bad motor wiring (shorts and poor interconnect) or the use of improper motors (i.e small high inductance motors or old surplus motors with unknown characteristics).

Damage determined to be from miswired motors or intermittent motor interconnection problems from work not performed by the manufacturer - WILL NOT - be covered under Warranty repair.

The repair charges are low for most damaged units (approx $100.00 - $200.00) but the loss is the down time which can be avoided.

You should check your motor wiring using the appropriate equipment to ensure the coils are not shorted together prior to connecting to the Translator/Driver box.

If you have any concerns about your stepper motors or motor wiring schemes
please call 800-424-7837 and we'll see what we can do for you.