Motion Control
Stepper Motors and Step Motor Controllers
  The Motion Group, Inc.



Stepper Motors
Linear Actuators
[PDF file - 700k]

Pico Droplet NEW
Syringe Pumps

Ready-To-Steptm
Black Box
Systems
   - Single Axis
   - Multiple Axis

OEM Card sets
   - Multiple Axis
   - Motor Drivers

CNC Retro Kits
High Res  NEW
Slide Systems
Videos
Software
free hit counter


step motors
American Made
The EID 2.0 / 4.0

The EID 2.0 / 4.0 series is a completely integrated package which includes a CY 545 or CY 550 intelligent motion controller, Digital-Servo driver, all power supplies an RS 232 (RS 422 optional) interface for one complete axis.

Ideal for instrumentation and industrial application such as X-Y tables, pumps dispensers, engravers and mill-drills requiring 1 to 5 horsepower at high speed (30k pps max.).

Programmable absolute position with slip detection to +/- zero steps within 16 million steps in a single motion. On-board encoder system automatically maintains correct motor positioning.

Performs complex point-to-point moves including programmable feed profiles, precise velocity control and response to trigger inputs. Eight user I/O lines, Auto-Start boot and up to 64k of user EEPROM allow for complete stand-alone, front panel or PLC interface operation.

High-level command set, in English, easily creates complex motion and I/O sequences with msec delays, input tests, outputs, loop counters, jumps and messages back to serial host. See CY 545 command set summary.

Network option SR-4 multiplexes up to 4 EID controllers per node x 16 nodes per port (64 axes per port).

Expanded I/O option provides 8 lines of output control for relays, solenoids, valves and input sensing of switches, sensors, etc.

Bullet proof protection includes over-temp, over-volts, open-circuit, short circuit shut down with LED indicators and on-card self-test.

Stepping System for 1 to 5 Horsepower Moters
The Motion Group, Inc. provides 3 models of these EID intelligent motion systems;
the EID 6.0, EID 10.0 and EID 15.0.

These units control one motor/encoder with continuous current from 6 to 15 amps at 85 to 270 VAC and selectable steps sizes of full, half and quad (from 200 to 8000 steps per revolution). Complete systems with serial and I/O cables including optical home sensor, fail-safe limits, and jog input are available. Position encoders are built in to the matching motor.



The motors come in three frame sizes covering a torque range of 15 to 257 lb-in (peak). For complete details request the Servo Systems Product book.

These large motor drivers are also available as SMD's or TST's.



Size is; 7.25" x 11.0" x 3.1" 
Three Models

SID 6.0     6 amp max @ 80 VDC
SID 10.0    10 amp max @ 80 VDC
SID 12.0    12 amp max @ 80 VDC
(requires external transformer)

The Motion Group, Inc. P.O. Box 669 Clovis, CA 93613-0669     © 1996 - 2007 All Rights Reserved-