Voice 1.800.424.STEP
FAX 559.325.7117
We offer three CNC standard kits:
These systems are protected from under-volts,
over-volts, over-temperature and over-current. No
cooling fans are required. A major safety feature
is the abort loop which stops all motors if any limit
switch is opened.
•
The CNC 2.0x3-80/200 ("Engraving Model")
is a single enclosure (7"x11"x2") containing
the translator, 3 drivers and supply operating
at 40 VDC at 2 amps/coil maximum. With 80
or 200 in/oz motors. This unit is intended for
smaller mills suited for engineering modeling
or hobby work.
•
The CNC 2.0x3-230/300 is the same system
with a 300 in/oz. motor set. The CNC 2.0x3-
230 is currently being used on benchtop
mill/drills, full sized Tree and Bridgeports, and
the most common inexpensive 3-in-1
combination machines.
•
The CNC 4.0x3-850 is a 4 Amp system in a
slightly larger enclosure with a full 850 in/oz
motor set. This is our high torque - low cost
system. For even more power consult the
factory (servo available). Standard System
configuration is Quarter step with 1.8 degree
motors for 800 steps/rev (other
configurations available).
If one of these kits doesn’t
fulfill your needs, please
feel free to get in touch with
us about a system that’s
custom designed for your
application.
We can, for example,
provide a complete kit for
Harbor Freight’s 1-1/2
HP Heavy-Duty
Milling/Drilling
Machine including
motor brackets, belts
and pulleys, and
complete assembly
instructions.
The CNC software includes milling, drilling and
letter engraving routines. Additional features are a
DFX translator which translates DFX files from
CAD systems to G-code files, a backplotter which
plots G-code files on the computer display and a
text editor which can create or modify these files.
Examples and exercises are included (see the
Mach3 software here).
The CNC also supports manual entry of G-code
commands from the computer keyboard. The X,
Y, and Z readouts are displayed as well as each
command as it is executed. All machine
parameters such as speeds, resolution, scaling
and backlash are programmable.